Please specify either 14 or 24 volt when ordering.
MODEL HDA,CF SERIES
FAA-PMA APPROVED

The model HDA,CF series has the capacity for simultaneous flashing, alternate flashing or both. It is designed to operate one, two or three-strobe light heads. Operating the wingtip strobes in the alternating mode will provide an accumulated 42 joules of power to each light. When in the simultaneous mode, the accumulated power to each light is 21 joules. In the three light mode, the wingtips will flash simultaneous at an accumulated 21 joules each, they alternate with a third light operating at an accumulated 42 joules. Outlet #1 is a trigger selector. A switch mounted in place of the jumper will allow wingtip outlets 3 & 4 to be turned off, while the tail outlet #2 will remain on. This function is commonly used when the third light is for ground operations. This power supply will operate from 10 to 30 volts DC.

SPECIFICATIONS:

Power Consumption:	7.0 Amps @ 14 volts DC	3.5 Amps @ 28 volts DC
Weight:	2.1 lbs.	Length:	5.50"	Width:	5.0"	Height:	2.37"
Model Number:	A413A,HDA-CF-14/28
Part Number:	01-0770028-05
Drawing Number:	70028 MODEL A650 PG/PR SERIES FAA-TSO-C30b APPROVED FAA PMA APPROVED The model A650 PG/PR series equips the aircraft wing tip with anti-collision, and forward position lights. It can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wingtip enclosure if applicable. It is available in 14 or 28 volts, and comes in a radio-shielded version. The forward position lamp is 26 watts. SPECIFICATIONS: Position Lamp Power Consumption: 2 Amps @ 14 volts DC 1 Amps @ 28 volts DC           Weight: 0.6 lbs. Length: 4.0" Width: 2.7" Exposed Height: 2.4" Drawing Number: 70054             Model Number: Part Number: Description: A650PG-14 01-0770054-00 position green, 14 volt A650PG-28 01-0770054-01 position green, 28 volt A650PR-14 01-0770054-02 position red, 14 volt A650PR-28 01-0770054-03 position red, 28 volt